Full automatic wire cut strip one end crimping another end stripping
Full automatic wire cut strip one end crimping another end stripping Thumb

Full automatic wire cut strip one end crimping another end stripping

  • Model No: 501S

  • Full automatic wire cut strip one end crimping another end stripping tinning 501S
    CapacityWire length 50mm, about 3,200 wires/hour (no twisting)
    Applicable wire diameterAWG # 32 - AWG#18
    Processing length (Central section with jacket remaining) 18mm- 99,990mm (wire clip can be refitted to 8mm)
    Stripping length Front 0.1-8.0mm rear 0.1-18.0mm
    Cutter depth Maximum adjustment 3.50mm resolution 0.01mm
    Cutting toleranceModifiable
    Crimping capacity 2 Tons
    Detection deviceLow air pressure, existing of electric wire, existing of the terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.
    Auxiliary devicePrewire feeding synchronizer, terminal waste paper rewinding device
    Power supplysingle phase, AC180V-242V, 50/60Hz, 10A
    Compressed air0.5 MPa(5kgf / cm2) clean dry air
    Dimension 1,800W × 900D × 1,450H, about 400KG
  • Inquiry now

Detailed description

Full automatic cut strip one end crimping another end stripping tinning 501S


Features
1. cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.
2. the production line can range from AWG18-AWG32, which is very practical.
3. this machine has the function of twisting.
4. ultra short line: middle leaving glue for 18mm
5. the machine's Tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.
6. the machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.
7. the machine is suitable for horizontal, straight OTP mold.


Model

WPM-501S

Capacity

Wire length 50mm, about 3,200 wires/hour (no twisting)

Applicable wire diameter

AWG # 32 ~ AWG#18

Processing length

(Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm)

Stripping length

Front 0.1~8.0mm   rear 0.1~18.0mm

Cutter depth

Maximum adjustment 3.50mm    resolution 0.01mm

Cutting tolerance

Modifiable

Crimping capacity

2 Tons

Detection device

Low air pressure, existing of electric wire, existing of terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.

Auxiliary device

Prewire feeding synchronizer, terminal waste paper rewinding device

Power supply

single phase, AC180V~242V, 50/60Hz, 10A

Compressed air

0.5 MPa(5kgf / cm2) clean dry air

Dimension

1,800W × 900D × 1,450H, about 400KG




Send us your question about this product

Verification Code Image

Related products

cable cutting stripping and crimping machine WPM-180
cable cutting stripping and crimping machine WPM-180
Inquiry now
Automatic Both Ends Flat Ribbon Cable Cutting Stripping And Crimping
Automatic Both Ends Flat Ribbon Cable Cutting Stripping And Crimping
Inquiry now
Automatic double-head vibrating plate terminal crimping machine
Automatic double-head vibrating plate terminal crimping machine
Inquiry now
Automatic Double Cable Combined Terminal Crimping Machine WPM-180
Automatic Double Cable Combined Terminal Crimping Machine WPM-180
Inquiry now